JEEPERF UPPER CONTROL ARM BUSHINGS  Re-engineered using modern material for Control, Comfort, Long Life And Responsive Steering

  

If your vehicle is suffering from early tire wear, handling problems, or loud noises under the chassis, you could be dealing with worn out suspension bushings.  

Designed to attach the moving suspension components to the vehicle, the bushings are a crucial part of your suspension and steering systems. 

The bushings are designed to absorb vibrations due to impacts from the road, smoothing and quieting out your ride.  The material used to absorb impact and vibrations in OEM bushings is rubber which had served the automotive industry for well over 80 years. With age, however, rubber loses its natural oils due to the elements, causing it to harden up, dry rot, crack and sag under the weight of the vehicle. It will lose its ability to absorb impacts and vibrations, and it will sag throwing off your suspension geometry and wheel alignment. When this happens, you start hearing more of the road noises, feeling more of its impact, losing your ability to steer the vehicle as accurately as was intended and wear out your front tires.  


LONG-TERM PERFORMANCE   At JeePerf, we redesign and build each bushing to exceed OE specifications by a great margin. Using modern materials and novel design techniques, we build our bushings for longevity, comfort, low to no maintenance requirements, precise steering and perfect fit. While the OE bushings might sag or rot away with time, our suspension bushings will have a very long service life.  


Why use JeePerf bushings?  


We build our bushings to achieve special design targets. They need to have a precise fit, very long, reliable service life, steady, non-degradable performance throughout their useful life, and to have better value than OEM offerings. For suspension and control arms, they also need to provide an unimpeded, smooth, non-binding, fluid motion that is also comfortable to live with on a daily basis.  


In order to achieve that we decided to:  


- Use softer, specially treated, permanently lubricated Polyurethane to dampen road noise and provide a quiet, comfortable yet very well controlled ride. Our soft polyurethane compound is proprietarily developed to provide ride qualities similar to NEW rubber in comfort, yet have the famous long service life of polyurethane.  


- Use a fully floating bushing design so it will maintain a fluid, resistance free, full range of motion. 


- Use chromoly alloy for pins and spacers to provide extremely solid engagement to the vehicle yet hard enough not to fuse itself to the mounting bolt that made replacing the bushing a tough and expensive exercise in the past.


With this novel design we are able to achieve more flexing and more load handling capacity than OEM, while maintaining low NVH, and very long service life at the same time. 


We strongly believe that using our bushings is a great upgrade to your vehicle's handling that will give you the best maneuverability yet maintain daily drive comfort. 


We believe we achieved our design goals with these bushings and believe you will be impressed with the results. We spared no expense designing and building these bushings which are hand built using the very best materials available.  

Built by enthusiasts, for enthusiasts, we invite you to consider them when you want to Replace, IMPROVE and UPGRADE your suspension.


The bushings will fit Maserati Coupe, Spyder, Gransport,  Upper Arm Flanbloc Bushings

Maserati Part # : 186496

This part is reengineered for better performance and is hand built using modern materials delivering better performance and longer service life than a new OEM genuine Maserati part.